Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS
PRODUCT SAFETY & LEGAL DISCLAIMER
IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO
MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY.
Review the product package and contents prior to beginning the installation. Take care when
opening the packaging and removing items. If a return is needed you will want to return the product in
its original packaging if possible.
This instruction guide is provided as a GENERAL installation guide, some vehicles vary dimensionally
and may require additional steps.
Test fit the product on the vehicle prior to any third party modifications and or finishing. The
manufacturer and/or distributors do not accept responsibility for third party charges, labor and or
third part replacement modifications. Some modifications may void the factory warranty.
Exercise due-diligence when installing this product. The manufacturer and distributors of this product
do not accept any responsibility for vehicle damage or personal injury resulting from the installation of
this product. Careless installation and operation can result in serious injury or equipment damage.
This product is for general off-road use. All liability for installation and use rests with the
owner/operator.
INSTALLER: Once installation is complete, please return this guide along with other documentation
included in this product back to the consumer for future reference. The manufacturer/distributors of
this product do not guarantee this particular version will be available at a later date.
REV.01
© 2017 Go Rhino Products. All rights reserved
www.gorhino.com
589 W. Apollo St., Brea, CA 92821
PART NO.
• 55312T
• 55317T
PRODUCT DESCRIPTION:
• RC2 LR CENTRAL
MOUNT
• RC2 LR BOTTOM
MOUNT
P: 888 427 4466
1

Publicidad

loading

Resumen de contenidos para Go Rhino 55312T

  • Página 1 The manufacturer/distributors of this product do not guarantee this particular version will be available at a later date. © 2017 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
  • Página 2 Installation of some of these products may alter the factory sensor system performance. • Factory sensors may read shackles or hooks protruding from the fairlead and or tow hooks. • All sensor testing is completed by Go Rhino Products and or third party testing labs on modified • vehicles. •...
  • Página 3 INSTALLATION INSTRUCTIONS PARTS INCLUDED IN THIS LIST: 1. RC2 LR Go Rhino recommends you, the installer, read this installation instruction manual from front to back before installing the product. You may also click here to view an installation video or visit http://www.gorhino.com/Installation-Videos.
  • Página 4 3. For 20” LED bar. Use the bolts (2) from the lightbar kit. 1. Tighten all the hardware to 70 in/lbs Max. DO NOT OVERTIGHTEN SCREWS. 2. Connect wiring harness according to the LED diagram. REV.01 © 2017 Go Rhino Products. All rights reserved...
  • Página 5 This warranty covers the cost of the product only and does not include the cost of removal, installation, third party modifications or shipping of the product. In no event shall Go Rhino be liable to buyer or any third party for any damage or harm caused by the product or use thereof, regardless of weather such damages were foreseeable and whether or not Go Rhino has been advised of the possibility of such damages, not withstanding the failure of any agreed or other remedy of its essential purpose.
  • Página 6 Los fabricantes / distribuidores de este producto no garantizan que esta versión en particular estará disponible en una fecha posterior. © 2016 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
  • Página 7 Los sensores de fábrica pueden leer los ganchos que sobresalen del producto. • Todas las prueba de sensores se hace por Go Rhino Products y o por un laboratorio externo. • • La sensibilidad del sensor, las conexiones de los sensores, las condiciones de funcionamiento son todas las variables que influyen en la funcionalidad de los sensores.
  • Página 8 Si necesita servicio de instalación de su nuevo producto, llame al distribuidor autorizado a quien usted compró el producto o una compañía de servicio autorizada instalación que se puede encontrar llamando al número gratuito 1-888-427-4466 en EUA. © 2017 Go Rhino Products. All rights reserved REV.01...
  • Página 9 3. Para la barra de LED de 20”. Use los tornillos (2) del kit de barra de luces. 1. Apriete todo el hardware a 70 pulg./lbs Max. NO APRIETE LOS TORNILLOS. 2. Conecte el arnés de cableado de acuerdo con el diagrama LED. REV.01 © 2017 Go Rhino Products. All rights reserved...
  • Página 10 En ningún caso Go Rhino será responsable ante el comprador o terceros por cualquier daño o perjuicio causado por el producto o el uso de los mismos, sin importar el tiempo en tales daños fueron previsibles y si Go Rhino ha sido advertido de la posibilidad de tales daños , no obstante el fracaso de cualquier remedio convenido u otro de su propósito esencial.

Este manual también es adecuado para:

55317t