Publicidad
Idiomas disponibles
Idiomas disponibles
rarily, turn it off by using the omnipolar
switch or by unplugging the plug from
the socket.
IMPORTANT
: Use only original Spare
Parts.
CLOTHING AND EQUIPMENT
Always wear anti-slip
sole footwear.
Wear protective goggles
or visor and safety wear.
It is advisable to wear work overalls in
order to reduce the risk of injury in the
event of accidental contact with a high
pressure jet.
FIELDS OF APPLICATION
The high pressure water cleaner has
been developed for washing vehicles,
machines, containers, façades, stables
and for removing rust without generating
dust or sparks.
The high pressure water cleaner with
single-phase motor is designed for use
in the home environment.
During cleaning, ensure that no dange-
rous substances of the object to be cle-
aned are dispersed into the environment
(such as asbestos, oil for example).
Carefully follow disposal instructions.
Do not treat concrete-asbestos surfaces
with high pressure jets. As it may cause
the detachment of dangerous asbestos
fibres as well as dirt, detrimental to the
lungs.
The risk exists particularly after the drying
of a surface treated with a water jet or
steam.
Do not clean delicate components made
of rubber, fabric or similar materials with
a multi-directional jet.
When cleaning with a high pressure, flat
jet, keep the nozzle at a minimum distan-
ce of 15 cm.
STARTING UP, OPERATIONAL
ADVICE
The trigger of the spray gun
must function smoothly and
return to initial position, after
release.
Check the functional conditions of the ap-
pliance before the start of each operation.
The mains cable and the plug, the high
pressure pipe with spraying device and
the safety devices are particularly im-
portant.Keep children and animals clear
when the appliance is operating.
Do not ever wash the ap-
pliance or other electrical
appliances with a water
jet. Short circuit danger!
Warning! Explosion or
deflagration hazards!
Do not spray and/or use
inflammable substances.
Check that there is sufficient air circulation
in the motor ventilation zone.
Do not cover the appliance, ensure that
there is sufficient motor ventilation.
Position the high pressure cleaner as far
away as possible from the object to be
sprayed.
Do not damage the mains attachment
cable by treading on it, squashing or pul-
ling it, etc.Do not detach the plug from the
socket by pulling the connection wire, but
pull out the plug.
Make sure hands are dry before touching
the plug and the connection cable.
Hold the spraying device with both hands
in order to properly absorb the reaction
force and the additional torque in the
case of spraying device with an inclined
spraying pipe. Always assume a safe and
secure position.
Before undertaking any
work on the appliance
always detachthe plug
from the power socket.
3 ASSEMBLY
Assemble storage hook(s) (Fig. 2) to handle.
Pushfirmly to ensure hook is secure.
14
Publicidad
