Fenton 102.150 Manual De Instrucciones página 4

UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
OVERVIEW
1. Tone arm Lever
The fixed tonearm can be raised and lowered pressing the raise / lower lever.
2. Tone-arm Stand
3. 33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable platter.
4. Autostop Switch ON/OFF
This switch turns auto stop on or off. When the automatic stop is enabled, the platform will start rotating as soon as the
tone arm is placed over the record and will stop rotating when it has reached the end of the record. Some vinyl records
stop before the end or do not stop when the end is reached. In this case set Auto-stop to OFF.
5. Tone arm Clip
This specially designed arm clip secures the tonearm while at rest or when not in use.
Cartridge with needle
6.
When the turntable is not in use, it is recommendable to place the removable protection cover on the stylus.
7. Volume control
Adjust the volume for the speakers.
8. LED Indicator
Indicator lights up when power turned on.
9. Function Mode
Select the BT or phono play function.
10. Platter
Place your record here.
11. 45RPM Platter
12. DC IN port
Connecting the 12Volt/DC power adaptor.
13. Line output
The sound signal from long-playing record is sent to this line output. Connect this signal to the line input of an such as
an amplifier or a line input of a CD/DVD player.
OPERATION
Switch the function mode (9) to PH. Turn on the power switch at the rear of the turntable player. The indicator will
1.
become red colour.
Place a record on the turntable platter and select the desired speed (33/45/78RPM) according to the record.
2.
NOTE: when playing a 45RPM record, use the included 45RPM adapter located inside the
accessories bag.
Remove the stylus protector. Open the tone-arm clip to release the tone-arm. Push the lift lever
3.
backward to raise the tone-arm and gently move the tone-arm to the desired position over the
record. The turntable will begin to spin when the arm is moved toward the record. Push the lift
lever forward to lower the tone-arm slowly onto the desired position on the record to begin playing
the record.
NOTE: -The record will begin to spin only when the tone-arm is moved toward the record if the Auto Stop is turned on.
- If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished (For some
few vinyl records, it will stop when it does not come to the end OR it will not stop when it comes to the end.). If
Auto Stop Control is turned OFF, record will NOT stop automatically when finished.
Turn the Volume Control Knob to adjust the volume.
4.
CONNECT BT-DEVICE
1.
2.
3.
4.
Noted: This device does not have a BT transmitter, this means that it is not possible to send sound via BT to, for example, a BT
speaker
When the unit is used as a BT speaker, all other playback functions cannot be used at the same time.
Switch the function mode (9) to BT. The LED indicator will flash in blue colour.
Turn on the BT function of your mobile phone, tablet or other BT device and search the turntable
player with its name Fenton recordplayer.
After pairing and connection, the LED indicator will stop flashing. You can play your music from
your BT-device.
Turn the volume control knob to adjust the volume.
4