Publicidad
6
Interpreting the LEDs
The status of the charge operation is communicated by the LED located at the base of each
charging pocket.
Function
No Battery/power
Charged
Charging
Temp Standby
No Battery COMMS
Battery Temp and
Timeout Fault
Charger Failure
See Also: "Troubleshooting".
Normal Operations
The optimal operating temperature range for the MX5 Multi-Charger is between 32°F and 140°F
(0°C and 60°C). While charging, the charger and battery pack will generate enough heat to feel
warm. This is normal and does not indicate a problem. Do not store the battery pack in direct
sunlight or anywhere the battery pack cannot cool down. If the battery pack is hot after removal
from the computer, allow it to cool at room temperature before placing it in the charger.
Charge times may increase significantly if the battery is warm or hot, since it takes the battery
pack longer to cool down while in the charger pocket. If the battery pack is hot from severe
environmental use and immediate recharging is necessary, place the battery pack in a cool air
stream or in a cool location until it is no longer warm to the touch before charging.
Do not place or store the MX5 Multi-Charger in hazardous locations.
MX5 Multi-Charger User's Guide
Indication
Off
Battery pack not plugged in or no power applied.
Green
Battery pack fully charged.
Yellow
Battery pack charging.
Flashing Yellow
Battery pack temperature out of range.
Solid Red on any
No or incorrect battery communication
station
Flashing Red on any
Battery pack fault or failure OR Timeout period expired.
station
Flashing Red on all
Charger failure.
stations.
Interpreting the LEDs
Description
E-EQ-MX5CHGROG-E-ARC
Publicidad
