Front Runner FANN002 Instrucciones De Montaje página 4

2 FIT AND SECURE
2.4
2.5
FANN002_REV_A01
4
Place some silicone on each of the four
Nut Plates (Item 3) before you secure them
to the roof. This will seal the holes drilled
earlier and fix the Nut Plate in place.
Do not place them against the roof just
yet.
See Step 2.5 for fasteners used.
Place a Spacer (Item 2) over each set of
holes you have drilled in Step 2.2.
Place the Foot Rail (Item 1) on the Spacers
and hold it in place. Having a friend will
help.
10mm
Insert the M6 x 35 Hex Bolt with M6
Spring Washer and M6 x 19 x 1SS Flat
Washer through the Foot Rail mounting
hole and the Spacer.
Place the Nut Plate with the silicone
applied to the underside of the roof.
Loosely tighten the bolt and insert the
second screw. Do not fully tighten untill
the rear bolts and Nut Plate are in place.
Fully tighten when all four bolts and both
nut plate are in place.
Repeat the step with the other side.
4
13mm
© 2019 FRONT RUNNER VEHICLE OUTFITTERS