Publicidad
before you start working
charger
power source
Maxpro can assure flawless functioning of the tool only when the correct accessories are used which can
be obtained from your Maxpro dealer
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the tool/charger by a person responsible for their safety
Secure the work piece (a work piece clamped with clamping devices or in a vice is held more securely
than by hand)
Hold the power tool only by the insulated gripping surfaces when performing an operation where the
accessory may contact hidden wiring or its own power cord (contact with a "live" wire will also make
exposed metal parts of the power tool "live" and shock the operator)
Use suitable detectors to find hidden utility lines or call the local utility company for assistance (contact
with electric lines can lead to fire or electrical shock; damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or an electrical shock)
Do not work materials containing asbestos (asbestos is considered carcinogenic)
harmful (contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to
the operator or bystanders); wear a dust mask and work with a dust extraction device when connectable
tain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in conjunction
with additives for wood conditioning; wear a dust mask and work with a dust extraction device when
connectable
-related national requirements for the materials you want to work with
accessories as well as when carrying or storing the tool
CHARGING/BATTERIES
Store tool/charger/battery in locations where temperature will not exceed 50°C or drop below 0°C
a safety check
the officially registered Maxpro Service Stations
source
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
of the plug
unattended
5
Cordless drill/driver MPCD14VDQF/2 User Manual
age is the same as the voltage indicated on the nameplate of the
immediately switch off the tool or unplug charger from
ay with the tool/charger
position before making any adjustments or changing
g is damaged; cord or plug should be replaced immediately at one of
replaced immediately
non-rechargeable batteries with the charger
-use for the tool, it is best to unplug the charger from its power
at least the highest no-load speed of the tool
(including children) with reduced physical, sensory or
wood species, minerals and metal may be
with the tool
officially registered Maxpro Service Stations for
wire in the cord of the charger to the earth terminal
charger, it must be disposed of safely and not left
GB
Publicidad
