Publicidad
Idiomas disponibles
Idiomas disponibles
Ø
Reversing the Door Swing of Your Appliance
This refrigerator-freezer has the capability of the door opening from either the left or right side. The unit
is delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please call service for reversal instructions.
Replacing the Light Bulb
Important note: Unplug the unit from the power supply before start
the process.
1. Remove the screw on the light cover by screw driver. (Fig.1)
2. Press the hooks on light cover. (Fig. 2)
3. Open the light cover towards arrow when top hooks pull out from
housing. (Fig. 3)
4. Pull out the cover towards arrow remove it. (Fig. 4)
5. Turn the light bulb counter clockwise and remove it. (Fig. 5)
6. Change the present light bulb with a new one of not more than 15 W. (Fig. 5)
7. Implement the steps in reverse order.
8. After waiting 5 minutes, plug the unit.
Replacing LED Lighting
If your appliance has LED lighting contact the help desk as this should be changed by authorized personnel
Ø
Cleaning Your Appliance
·
Unplug the unit, and remove the food and baskets.
·
Wash the inside with a warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
·
Wash the baskets with a mild detergent solution.
·
The outside of the unit should be cleaned with mild detergent and warm water.
CAUTION
Failure to unplug the refrigerator-freezer could result in electrical shock or personal injury.
Ø Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
refrigerator-freezer if you minimize the number of times the door is opened. If the power is going to be
off for a longer period of time, you need to take the proper steps to protect your food.
Ø Vacation Time
Short vacations: Leave the unit operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all food and unplug the
power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door
open slightly: blocking it open if necessary
Ø
Moving Your Appliance
·
Remove all the food.
·
Securely tape down all loose items inside your unit.
·
Turn the leveling screws up to the base to avoid damage.
·
Tape the door shut.
·
Be sure the unit stays in the upright position during transportation.
CARE AND MAINTENANCE
11
only.
Publicidad
