Hansgrohe 06310000 Instrucciones De Montaje página 12

4
5
6
3
1
12
27 mm
2
3 mm
English
Install the spout
Remove the plug from the spout tee.
Swing C only: Install the deco ring on the
spout.
Make sure that the screw hole in the deco ring
lines up with the screw hole on the spout.
Swing C / Tango C / Limbo C: (1) Push the
spout sealing ring firmly into the spout tee.
(2) Press the spout over the spout tee.
(3) Tighten the screw with a 3 mm Allen wrench.
Do not over tighten the screw.
Overtightening the screw will
deform the o-ring, causing a leak.