· Grip the tab on the filter and pull it upward, then pull it out(For model C).
Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it. Do not
·
clean the filter in a dishwasher.
To attach:
· Insert the air filter into the unit from underside to upside for model C.
Note: When re-install the filter, please pat the middle buckles of the filter first and then pat the
bottom bukcle.
Insert the filter into the unit,then press the tab in on the filter slightly and push the filter
·
upward for model A.
Insert the right and left filters into the unit for model B. Then reinstall the water bucket
·
properly.
CAUTION
DO NOT operate the dehumidifier without a filter because dirt and lint will clog it and reduce
performance.
Note:The cabinet and front may be dusted with an oil-free cloth or washed with a cloth dampened
in a solution of warm water and mildliquid dishwashing detergent. Rinse thoroughly and wipe dry.
Never use harsh cleansers, wax or polish on the cabinet front. Be sure to wring excess water from
the cloth before wiping around the controls. Excess water in or around the controls may cause
damage to the unit.
When not using the unit for long time periods
· After turning off the unit, wait one day before emptying the bucket.
· Clean the main unit, water bucket and air filter.
· Wrap the cord and bundle it with the band(For model A and model B).
· Cover the unit with a plastic bag.
· Store the unit upright in a dry, well-ventilated place.
Note: You should loose the screw on the cover of the bucket before
clean it and then install it back(For model A and model B).
Model C
V.1
Band
Power cord
Page 17