Publicidad
Idiomas disponibles
Idiomas disponibles
C L E A N I N G / M A I N T E N A N C E
CLEANING/MAINTENANCE
Always unplug the heater before cleaning and allow the
heater to cool down.
1. Clean the unit with a soft cloth moistened with a mild
soap solution.
2. NEVER use abrasive or flammable solvents to clean
the unit.
3. After cleaning, be sure to completely dry the unit
with a cloth or towel.
AUTO SAFETY SHUT-OFF
This heater is equipped with a patented, technologically-
advanced, safety system that requires the user to reset
the heater if there is a potential overheat situation. When
a potential overheat temperature is reached, the system
will automatically shut the heater off. It can only resume
operation when the user resets the unit.
RESET INSTRUCTIONS
If your heater shuts down:
1) Turn Control to OFF.
2) Unplug the unit and wait 30 minutes.
3) Plug in and operate normally.
T R O U B L E S H O O T I N G
TROUBLESHOOTING
If your heater fails to operate:
• Turn the heater OFF and UNPLUG THE HEATER.
• Make sure the electrical outlet or circuit breaker is
working.
• Check for obstructions. If you find an obstruction turn
the heater OFF, and unplug the unit. Carefully
remove the obstruction and follow the reset
instructions.
• The temperature may be set too low. Turn the
Thermostat Control clockwise until the heater restarts.
• Make sure Mode Control is in LO (I), HI (II) or FAN
(
) setting.
Please DO NOT attempt to open or repair the
heater.
HEATER STORAGE
1. Store heater unit with cord in a cool, dry location.
2. We recommend storing the unit and cord in the
original package.
If you have any questions regarding your product or
would like to learn more about other Holmes
please visit our website at www.holmesproducts.com.
For inquiries regarding recycling and proper disposal of
this product, please contact your local waste
management facility.
products,
®
Publicidad
