Audiolab DSP-4800W Manual De Usuario página 13

8. EQ Setting:
Parameter EQ, OUT1-OUT8 Each channel can
set 6 parameter EQ (EQ1-EQ6).
Example
A. At parameter status:
B. At Lo_Shelf, Hi-shelf status:
Example:
1. Press OUT1 channel for 3 seconds till yellow
light displays into Edit status of OUT1.
2. Press "<BACK" or "NEXT>, switch to EQ, into
"Parameter" setting status.
Display next:
3. Turn the first knob of "PARA", can switch to
"Lo-shelf" or "Hi-shelf" setting status. Press
ENTER to confirm.
Display next
4. Press "ENTER", confirm select "Lo-Shelf", into
parameter setting. Turn the first knob of "PARA"
to adjust gain value, Turn the second knob to ad
just Freq, Turn the third knob to select slope. (Turn
the knob clockwise, the value increase; Turn the
knob withershins, the value decrease).
Display next:
5. Press "<BACK" or "NEXT>", can switch among
EQ1-EQ6, the setting method is the same.
Freq: 20Hz-20Khz
Gain: -20dB-+15dB
Bandwidth: 0.05/Oct-3/Oct
Freq: 20Hz-20Khz
Gain: -30dB-+15Db
Slope:+6dB, +12dB
P. 13
DSP-4800W
ENGLISH VERSION