Descargar Imprimir esta página

Audiolab DSP-4800W Manual De Usuario página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

2. PANEL OPERATION
INPUT PARAMETER SETTING:
Long press (about 3 second) "IN A/ IN B/ IN C/ IN D",
and then the relevant channel into Edit Status, yellow
light display. (Each channel default for mute), Short press
relevant function key set the parameter setting, press
"<BACK" and "NEXT>" select function setting, short
press ENTER to confirm relevant parameter.
1. Name Setting:
Example
1. Press A channel key about 3 seconds
till the yellow light display, into Edit Status.
Display next:
2. Turn the first knobof "PARA" select figure
or letter, then, the second knob to select next
one. Press ENTER to confirm and save.
2. Input Delay Setting:
Parameter Delay, adjust range: 0ms-1000ms,
0Meter-346Meter, 0Feet-1134.88Feet.
Example
1. Press A channel key about 3 seconds till the
yellow light display, into Edit Status.
2. Press "<BACK or "NEXT>", switch to Delay.
Display next:
3. Input Polarity Setting:
Parameter Polarity, +Normal: Positive, -Invert:
Negative pole. Each channel has unattached
phase control.
Example
1. Press A channel key about 3 seconds till the
yellow light display, into Edit Status.
2. Press "<BACK or "NEXT>", switch to Polarity.
3. Turn the first knob of "PARA" to change the Polarity.
Display next:
P. 7
DSP-4800W
ENGLISH VERSION

Publicidad

loading

Productos relacionados para Audiolab DSP-4800W