Metcal MX-5000 Serie Guia Del Usuario página 11

6. TIPSAVER WORKSTAND OVERVIEW
a. TipSaver Workstand Features
b. Adjustable Angle Cradle Guide*
Workstand Cradle
MX-W1AV MX-W1CR
MX-W1AV MX-W1CR
MX-W4PT MX-W4CR
MX-W5DS MX-W5CR
c. TipSaver Workstand Configurations
The TipSaver Workstand is designed to accommodate different configurations in a minimal
footprint. To change the configuration;
1. Remove the two screws from the underside of the workstand base (MX-WB).
2. Move the Workstand Sponge Holder (MX-WSH) into the desired position.
3. Replace the two screws into the underside of the workstand base.
Coiled Brass Cleaner or Coiled Brass Cleaner with Sponge
d. Cradle Positioning
The TipSaver Workstand incorporates an adjustable angle cradle allowing the insertion angle for
the hand-piece to be adjusted for the comfort of the operator. To adjust the angle of the cradle;
1. Loosen the knobs counterclockwise.
2. Adjust the cradle to the desired angle.
3. Tighten the knobs clockwise.
Adjustable Angle Cradle*
Workstand Base (MX-WB)
Workstand Sponge Holder
Description
TipSaver cradle, Advanced hand-piece, includes knobs
TipSaver cradle, UltraFine hand-piece, includes knobs
TipSaver cradle, MX-PTZ hand-piece, includes knobs
TipSaver cradle, MX-DS1, includes knobs
9
Adjustment Knobs
(MX-WSH)