Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and maintenance
4. Set the temperature knob
clockwise for warmer air or counterclockwise for cooler air.
5. Set the dimmer knob
clockwise for a higher effect or counterclockwise for a lower effect.
The flame effect is displayed at the front of the heater.
6. After use, set the ON/OFF switch to the OFF position, unplug it, and let the
heater cool down completely before cleaning, moving or storing it.
Cleaning and maintenance
WARNING!
Burn hazard!
The heating element and air vents can become very hot during
use and cause burns.
− Let the heater cool down completely before each cleaning.
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short circuit.
− Make sure that no water or other liquids penetrate the
housing.
− Never immerse the heater in water or other liquids.
NOTICE!
Risk of damage!
Improper handling of the heater may result in damage.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, sharp or metallic cleaning utensils such as
knives, hard scrapers, etc. They may damage the surfaces.
− Do not use any abrasive, alkaline, or solvent cleaners to
clean any part of the heater, they will permanently scratch
the surface.
14
7
to your desired heat setting by turning it
6
for the desired flame effect
2
by turning it
Publicidad
Capítulos
Tabla de contenido
