3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm)
in front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, crash, etc. Using the device in an unauthorized way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
Keep this manual for future reference.
4.
Features
class AB amplifier with high-quality toroidal transformer
built-in protection circuit
front panel function instructions: PWR: power indicator - BRI: bridge indication - STR: Stereo
indication - PROT: protection indication - CLIP: clipping indication - SIG: Signal A/B channel
5.
Overview
Refer to the illustrations on page 2 of this manual.
Front Panel
1
On-off switch
2 + 5
Clipping LED
These LEDs will flash when the output signal starts distorting.
Gain control – left
3
Volume adjusting knob for the left channel.
Gain control – right
4
Volume adjusting knob for the right channel.
6
Front panel
7
PROT LED
8
Power LED
Rear Panel
1
L/R channel inputs
2
Lift/ground switch
3
Bridge/stereo switch
4
L/R signal outputs
5
Power input
6
L/R speaker outputs
V. 01 – 19/09/2016
HQAA1000x
5
©Velleman nv