Personnel Qualification - WIKA PG43SA-S Manual De Instrucciones

3. Safety
3.4 Compliance with the conformity in accordance with 3-A
For a 3-A compliant connection the following sealings have to be
used:
For milk thread fittings per DIN 11851, suitable profile sealings
„
have to be used (e.g. SKS Komponenten BV or Kieselmann
GmbH).
For fittings per IDF sealings with support ring per ISO 2853 have
„
to be used.
Note: Connections per SMS, APV RJT and NEUMO Connect S are
not 3-A compliant.
3.5 Compliance with EHEDG conformity
For an EHEDG conform connection, sealings in accordance with the
current EHEDG policydocument must be used.
Sealings for connections per ISO 2852, DIN 32676 and
BS 4825 part 3 are, e.g., manufactured by Combifit International B.V.
A manufacturer of sealings for connections per DIN 11851 is, e.g.,
Kieselmann GmbH. A manufacturer of VARIVENT
GEA Tuchenhagen GmbH. A manufacturer of NEUMO BioConnect
sealings is, e.g., Neumo GmbH & Co. KG.

3.6 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and
damage to equipment.
▶
The activities described in these operating instruc-
tions may only be carried out by skilled personnel
who have the qualifications described below.
WIKA operating instructions pressure gauge, PG43SA-S, PG43SA-C
sealings is, e.g.,
®
EN
®
7