Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
STEP 1: Turn OFF power prior to installation.
Remove the diffuser and existing bulb if necessary.
Remove the existing trim.
STEP 3: Disconnect the included Edison base adaptor
from the LED downlight trim and screw adaptor into
socket in recessed housing.
STEP 5: Gently squeeze together the torsion springs
of the LED trim and insert into the recessed housing.
STEP 2: Before installation, select your preferred CCT
by moving the switch to either 2700K, 3000K, 3500K,
4000K or 5000K.
STEP 4: Reconnect LED downlight trim to the Edison
base adaptor.
STEP 6: Gently push up the LED downlight until trim
is flush with the ceiling. Ensure no wires are exposed.
Turn ON power.
2
2700K
3000K
3500K
4000K
5000K
Publicidad
