Baby Trend TS11S Serie Manual De Instrucciones página 8

STROLLER MODULAR ADAPTERS
10
IMPORTANT! For any
accessory that is placed at the
highest or middle position,
the stroller adapters MUST be
installed at the same height
level on the stroller frame.
To Install
Insert the adapter onto the
stroller frame as shown until
it clicks and locks in (Fig. 10a).
Repeat for the other side.
Example
See (Fig. 11e) for an example
for installing an accessory.
Removal
Press the button and lift the
adapter up simultaneously
(Fig. 10b). Repeat for the other
side.
11
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
11
Fig. 10a
Fig. 10b
ASSEMBLING THE TODDLER SEAT
Unfold the toddler seat fully (Fig. 11a).
To assemble the toddler seat, unzip
the zipper fully, located underneath
the seat (Fig. 11b).
Unwrap the fabric from the tube (Fig.
11c). (1) Push the lower tubes into
the inner slot of the seat frame. (2)
Ensure the push pin clicks into place
on both sides. Then wrap the fabric
back, and zip the zipper around the
sea frame.
If received unattached, follow below
instructions to attach:
Feed the strap through the tab to
anchor the seat fabric on the seat
frame, ensure the toddler seat is
secured (Fig. 11d). Repeat for the
other side.
1
2
Fig. 11c
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 11a
Fig. 11b
Fig. 11d
12