essentiel b ESLHP10-2b Instrucciones De Uso página 44

WARNING
Don't touch the buttons while inserting
the plug because
calibrates the systems during the first
seconds: touching the buttons, the
machine couldn't work property. In
this case, remove the plug and repeat
the operation.
PROGRAMME SELECTOR with
OFF position
 Rotating the programme selector in both
directions it's possible to select the
desired drying programme.
To cancel the selections or switch off the

appliance rotate the programme selector
on OFF (remember to unplug the appliance).
First starting
- Language setting
After connecting the machine to the

network and turning it on, press the
"D" "E"
button or
the available languages. ENGLISH is
always the first language shown.
Select the desired language pressing the

START/PAUSE button.
- Change the language
If you want to change the setting language
you will have to press simultaneously
"E"
and buttons for about 5 seconds.
ENGLISH will appear on the display, and
you will be able to choose a new language.
START/PAUSE button
Close the porthole BEFORE pressing
the START/PAUSE button.
the machines
to see on the display
"D"
44
To start the selected cycle with the preset

parameters, press START/PAUSE. When
the programme is running, the display will
show the time to elapse.
Moreover, if you want to modify the

chosen programme, press the desired
options buttons,
parameters and then press START/
PAUSE button to start the cycle.
Only the options compatible with the
set programme can be selected.
 After switching on the appliance, wait a few
seconds for the programme to start running.
PROGRAMME DURATION
When a programme is selected the

display automatically shows the cycle
duration, which can vary, depending on
the options selected.
Once the programme has started you will

be kept informed constantly of the time
remaining to the end of the drying cycle.
The appliance calculates the time to the

end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to the
humidity level of the load.
PROGRAMME END
"END" ("End" on some models) will

appear in the display at the end of the
programme, it is now possible to open the
door.
At the end of the cycle, turn off the

appliance by turning the programme
selector to the OFF position.
The programme
ALWAYS be put in the OFF position at
the end of the drying cycle before a
new one can be selected.
modify the default
selector must