PNI Hunting 250C Manual De Instrucciones página 5

1. Signal indicator
2. Reset button
3. Micro SD card slot
4. SIM card slot
5. Micro USB port
LED indicators
Battery charging indicator - While the batteries are charging, the
LED is red. When the batteries are fully charged, the LED turns
green.
Connection status indicator:
The blue LED is on - the camera has connected to the GSM network
The blue LED is flashing - the camera has not connected to the
GSM network. Press the Reset button for 5 seconds and wait for
the camera to connect.
The blue and red LEDs flash quickly alternately - the SIM card is
not recognized by the camera or the SIM card is missing.
The blue and red LEDs blink infrequently (at 2 second intervals)
alternately -
The blue and red LEDs flash at the same time (one second apart)
- incorrect APN
The red LED is on - the GSM signal is weak.
The green LED is on - the GSM signal is strong.
The blue LED is on - the GSM signal is normal.
On/off button
When the button is downward, the camera is turned off.
When the button is in the middle position, the camera is in photo
monitoring mode.
When the button is upward, the camera is in video monitoring
mode.
6. On/off button
7. Battery charge indicator
8. Connection status indicator
User manual - 5