KRESS Commercial KAC929 Manual De Instrucciones página 5

ASSEMBLY AND OPERATION
• INSTALLING YOUR CYBERCABINET
STEP 1
If your CyberTank has already been installed in the preferred location.
- Remove the protective guards of CyberTank. If the rain protection cover is installed, remove it first.
- Determine the CyberCabinet's installation position based on the location of your CyberTank either in your
truck bed or trailer.
- Place the cabinet base outline on the outside of your CyberTank.
NOTE: The line 1 and line 2 of the base outline should fit closely with the CyberTank mounting brackets.
NOTE: Please place the base outline in the correct direction. Do not confuse the front and back of the base
outline. Please pay attention to the printing on the base outline.
- Drill the mounting holes (13 mm) into the truck or trailer as it shows on the base outline.
NOTE: See the following figure for the recommended drilling position of mounting holes. The recommend-
ed drilling position is for reference only which can be adjusted according to the actual situation.
1 2
3 4 5 6
1 2
Line 2
Line 1
EN
3 4 5 6
- Place the base frame according to the position of the mounting holes. Fix the base frame with carriage
bolts and nuts.
5