Publicidad
24
23
22
T
PRODUCT ALIGNMENT
3. Adjust the cabinet doors until they align with the lights using the three-way adjustment features in the hinges, adjusted using a #2
R
Phillips Head screwdriver.
3A. Height: With the hinge slightly closed, you can access the middle screw. This screw will move your door front up and down.
P
3B. Side to Side/Depth: With the hinge fully extended, you can access the front and back screws. The front screw will adjust the door
from side to side and the rear screw will adjust the door's depth.
N
4. Press a # 10 screw cap [SS672], provided with each light, onto all exposed screw heads.
5. Press a hole plug [SS134], included with your cabinet hardware, into all open mounting holes.
M
6. Some Robern cabinet doors will swing greater than 110°. To prevent the door from interferring with the Tenor Lights, hinge clips have
been provided with your cabinet. To install, snap the hinge clips over the elbow of the hinges. The door will now be limited to a swing
L
radius of 110°. Failure to install the hinge clips may result in damage to the Tenor Lights and/or the cabinet.
3A
K
J
H
24
23
22
Surface Mount
T
G
F
R
P
E
N
D
M
C
L
B
SS134
K
A
6A
24
23
22
J
H
G
110°
MAX
F
E
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
www.robern.com
800.877.2376
D
C
21
20
19
18
3B
21
20
19
18
Recess Mount
SS672
SS672
6B
21
20
19
18
17
16
15
14
17
16
15
14
SS672
SS672
17
16
15
14
15
13
12
11
10
13
12
11
10
DRAWN
13
12
11
10
Part no. 209-1400 17-NOV-2022
Tenor Light
9
8
9
8
9
8
Publicidad
