Publicidad
Idiomas disponibles
Idiomas disponibles
3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures.
Protect this device from shocks and abuse. Avoid brute force when operating the
device.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
All modifications of the device are forbidden for safety reasons. The warranty will not cover damage
caused by user modifications to the device.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
The warranty does not cover damage caused by disregard of certain guidelines in this manual and
the dealer will not accept responsibility for any ensuing defects or problems.
The warranty does not cover mechanical wear and LED failure.
A qualified technician shall install and service this device.
Do not switch on the device immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
This device is designed for professional use on stage, in discos, theatres, etc. Only use the device
indoors with an alternating current of 230 VAC, 50 Hz.
Do not use lighting effects continuously: regular operation breaks will prolong their lives.
There may be a particular smell when the device is activated for the first time. This is normal and
any smell will gradually disappear.
Keep this manual for future reference.
4.
Features
small 4-in-1 LED PAR with a light body and a fashionable design
built-in programs including dimming, strobe effects, fading, etc.
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
display
2
control buttons
3
power input
4
DMX input
6.
Installation
Choose a suitable mounting spot. Mount the device in the desired angle using the included bracket.
Connect the power cord to the mains. Disconnect after use.
Mounting the Device
Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable
norms.
The carrying construction must be able to support 10 times the weight of the device for 1 hour
without deforming.
Adjust the desired inclination angle via the mounting bracket and tighten the bracket screws.
Always secure the installation with a secondary attachment e.g. a safety cable.
Never stand directly below the device when it is being mounted, removed or serviced. Have a
qualified technician check the device once a year and once before you bring it into service.
Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
V. 01 – 20/06/2014
VDPLP708RGBW
5
6
7
4
DMX output
power output
double mounting bracket
©Velleman nv
Publicidad
