Reolink Lumus Instrucciones De Operación página 6

Troubleshooting
IP Cameras is not Powering on
If your camera is not powering on,
please try the following solutions:
• Plug the camera into another power outlet.
• Use another 5V power adapter to power
up the camera.
If these won't work, please contact Reolink
Support.
Failed to Scan QR Code on the Phone
If the camera failed to scan the QR code
on your phone, please try the following
solutions:
• Remove the protective film from the
camera lens.
• Wipe the camera lens with a dry
paper/towel/tissue.
9 English
• Vary the distance (about 30cm) between
your camera and the mobile phone which
enables the camera to focus better.
• Try to scan the QR code under sufficient
lighting.
If these won't work, please contact Reolink
Support.
WiFi Connection Failed During
Initial Setup
If the camera fails to connect to WiFi,
please try the following solutions:
• Please make sure the WiFi band is 2.4GHz,
the camera does not support 5GHz.
• Please ensure you have entered the correct
WiFi password.
• Put your camera close to your router to
ensure a strong WiFi signal.
• Change the encryption method of the WiFi
network to WPA2-PSK/WPA-PSK (safer
encryption) on your router interface.
• Change your WiFi SSID or password and
make sure that SSID is within 31 characters
and password is within 64 characters.
• Set your password with only characters on
the keyboard.
If these won't work, please contact Reolink
Support.
Specifications
Video & Audio
Video Resolution:
1080p HD at 15 frames/sec
Field of View: Horizontal: 100°, Vertical: 54°
Night Vision: Up to 10m (33 ft)
Audio: Two-way audio
Smart Alarm
Mode: Motion Detection + PIR Detection
PIR Detection Angle: 100° horizontal
Audio Alert:
Customized voice-recordable alerts
Other Alerts:
Instant email alerts and push notifications
General
Power: 5V/2A
WiFi Frequency: 2.4 GHz
Operating Temperature:
-10°C to 55°C (14°F to 131°F)
Weather resistance:
IP65 certified weatherproof
Size: 99 x 91 x 60 mm
Weight: 185g (6.5 oz)
Notification of
Compliance
FCC Compliance Statement
This device complies with Part 15 of FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
English 10