Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
sharpening or replacing the blade. Note the location of the blade on the guard and
protect your hand from injury.
Clean the brush cutter after each use
See the MAINTENANCE section for cleaning instructions.
WARNING:
servicing the brush cutter. Failure to comply could result in possible serious personal
injury.
Check for blockage of the 3-tooth blade
To prevent blockage, keep the blade clean. Remove grass clippings, leaves, dirt and any
other accumulated debris before and after each use.
When blockage happens, stop the brush cutter and remove the battery. Then remove
any grass that may have wrapped itself around the motor shaft or the blade.
TO START/STOP THE MACHINE
See "STARTING/STOPPING THE POWER HEAD" section in the power head PH1400/
PH1400-FC/PH1420/PH1420-FC operator's manual.
Tips for best brush-cutting
◾
Always hold brush cutter on your right side with both hands when operating. Use
a firm grip on both handles.
◾
Maintain your grip and balance on both feet. Position yourself so that you will not
be drawn off balance by the kickback reaction of the cutting blade.
◾
Inspect and clear the area of any hidden objects such as glass, rocks, concrete,
fencing, wire, wood, metal, etc., which can be thrown or entangled in the blade.
◾
Never use blades near sidewalks, fencing, posts, buildings or other immovable
objects.
◾
Never use a blade after hitting a hard object without first inspecting it for damage.
Do not use if any damage is detected.
◾
Inspect machine for damage upon striking a hard object or if there appears to be
excessive vibration.
Always wear gloves when mounting or replacing the guard or when
Ensure the blade has come to a complete stop before cleaning or
BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC
27
Publicidad
