Publicidad
Idiomas disponibles
Idiomas disponibles
PACKAGE CONTENTS
Part
Description
A
Floor Jack
B
Pumping Handle
C
Carrying Handle
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information
provided with and on this jack before using. The owner and/or operator of this jack shall
have an understanding of the jack and safe operating procedures before attempting to
use. The owner and/or operator shall be aware that the use and repair of this product
may require special skills and knowledge. Instructions and safety information shall be
conveyed in the operator's native language before use of this jack is authorized. If any
doubt exists as to the safe and proper use of this jack, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts
(including labels) are noted. Any jack that appears damaged in any way, operates
abnormally or is missing parts, shall be removed from service immediately. If you suspect
that the jack was subjected to a shock load (a load dropped suddenly, unexpectedly upon
it), immediately discontinue use until the jack has been checked by a factory authorized
service center (contact distributor or manufacturer for list of Authorized Service Centers).
It is recommended that an annual inspection be done by qualified personnel. Labels and
owner's manuals are available from manufacturer (see page 7).
PRODUCT DESCRIPTION
This Hydraulic Floor Jack is designed to lift, but not support, one end of a vehicle. This
Jack must be used in conjunction with a pair of appropriately rated jack stands.
Lifting Arm
Saddle
Front Wheel
Engage release
valve with this end
Qty
1
1
1
Carrying
Handle
Figure 2 - Typical Floor Jack Nomenclature
A
Figure 1 - Package Contents
Cover Plate
(remove to access oil filler plug on
top of reservoir)
2
C
Handle Sleeve
Release Valve
Rear Caster
Handle Grip
Handle
B
Publicidad
