Publicidad
Idiomas disponibles
Idiomas disponibles
A. MASTER- /SLAVE MODE
The unit can be linked together in daisy chain in master/slave mode to perform the great built-in pre-programmed
lighting shows triggered by music. In Master/Slave mode refer to the settings below:
Master unit: Set working at Easy sound or auto mode operation
Slave units: DMX start address MUST be set to d001.
B. SOUND ACTIVE OR AUTO MODE
Set the product in one of the standalone modes to control without connecting a DMX controller.
Note: Never connect a product that is operating in any standalone mode (auto or sound) to a DMX string connected
to a DMX controller.
Auto mode:
Follow below actions to setup the auto standalone mode:
Press <MENU> repeatedly until Ax x shows on the display.
Use <MENU> select auto program (A1 x – A4 x)
Use <UP> or <DOWN> to choose the speed of the program (Ax 1 – Ax 9).
Press <ENTER>
Mode
Program
A1 Mode
Auto Program 1
A2 Mode
Auto Program 2 (Not Flash)
A3 Mode
Auto Program 3 (Flash)
A4 Mode
Auto Program 4 (All Bright Flash)
Sound mode:
Follow below actions to setup the sound standalone mode:
Press <MENU> repeatedly until Sx x shows on the display.
Use <MENU> select sound program (S1 x – S4 x)
Use <UP> or <DOWN> to choose the speed of the program (Sx 1 – Sx 9).
Press <ENTER>
Mode
Program
S1 Mode
Sound Program 1
S2 Mode
Sound Program 2 (No flash)
S3 Mode
Sound Program 3 (Flash)
S4 Mode
Sound Program 4 (All Bright Flash)
Variable Speed
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
Variable Speed
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
8
Publicidad
