Silvercrest SLB 10 A1 Instrucciones De Uso página 95

♦ If the two speakers have paired successfully, you will hear a beep.
The TWS mode is switched on.
The TWS LED 8 on the left speaker lights up green.
♦
The TWS LED 8 on the right speaker flashes green.
♦
♦ Pair the left speaker with a Bluetooth
♦ Start playback on the Bluetooth
NOTE
► If you do not pair the two speakers within 6 minutes, the speakers
will turn off automatically. If this happens, you will have to switch the
speakers back on again before restarting the pairing process.
► Make sure you position the left and right speakers correctly for
playback.
► The playback buttons work on both speakers.
Switching off TWS mode
♦ Briefly press the
TWS mode. You will hear a beep and the TWS LED 8 goes out on
both speakers. Playback is resumed via the left speaker.
■ 92 │ GB │ MT
®
button 7 on one of the speakers to deactivate
device.
®
device.
SLB 10 A1