Publicidad
Port
Description
WAN/P
The WAN/POE port is used to connect to network devices,
OE
such as a switch OR POE adapter to power the device
The LAN port is used to connect to network devices, such as a
LAN
switch or PC
WAB-5010
Reset
WAB-6010
Power
To power the device by DC
With the AP powered on, press the Reset button
for 10 seconds until the Signal Strength LED blink
faster than ever. The AP will restart itself and
reset the device to factory default settings.
With the AP powered on, press the Reset button
for 10 seconds and release. When WIFI LED off,
the AP will restart itself and reset the device to
factory default settings.
-3-
Publicidad
