Whalen SM3IN1-5R Instrucciones De Montaje página 20

Mounting the Monitor Brackets to a television with a Curved/Recess Back
24. Determine the correct diameter of the Bolt the TV requires by hand threading them into the
threaded insert on the back of the TV. If you encounter any resistance, stop immediately. If
you are unable to find the correct Bolt consult a local hardware store.
25. Follow the appropriate diagram above to attach the Monitor Brackets (JL/JR) to the back of
the TV with the selected fasteners. Make sure the Monitor Brackets are vertically centered and
level with each other. Secure the Bolts with a Phillips screwdriver. DO NOT over tighten the
Bolts.
NOTE: Lean the TV up against a wall, or other solid surface, when attaching the Monitor
Brackets. DO NOT place the TV face down on the glass as this may cause permanent damage.
TV
20