Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
Pliers (that open to
■
39.5 mm [1
⁄
"])
9
16
Tools needed for installation
Open end wrenches 13 mm
■
(1/2") and 14 mm (9/16")
TORX T20
Security
†
■
screwdriver
6.3 mm (1/4") nut driver
■
Parts supplied
A
D
E
H
Parts supplied for PD Models:
Service door lock cam
Screws (2)
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Transit bolt hole plug (4)
Alternate Parts
Your installation may require additional parts. If you are
interested in purchasing one of the items listed here, contact
your authorized Maytag distributor.
If you have
Laundry tub or standpipe
taller than 2.4 m (96")
† TORX and T20 are trademarks of Acument Intellectual Properties, LLC.
6
Flashlight (optional)
■
Level
■
Wood block
■
Ruler or measuring tape
■
B
C
Card reader bezel
E. Removable tie strap
F. Drain hose
G. Hose clamp
H. Power Cords (2)
You will need to buy
Sump pump system (if not already
available)
If you have
Overhead sewer
Floor drain
Drain hose too short
Options
Pedestal
You have the option of purchasing pedestals separately for this
washer. The pedestal will add to the total height of the washer.
F
G
Pedestal
Height
73 mm (2
⁄
")
7
8
Specifications
These units are sold in multiple regions with different
requirements for measuring capacity. Below are a few
of the valid forms of measure posted on this product:
Dry Linen Capacity: A weight measure that reflects a minimum
threshold for dry volume capacity that is needed for import tariff
purposes.
IEC Capacity: The capacity measure that represents the
maximum capacity of dry linens and textiles which the
manufacturer declares can be treated in a specific cycle.
Dry Linen Capacity
10.5 kg (23 lb)
IEC Capacity
10.5 kg (23 lb)
Sound Level
Lpa: 58 db(A) (kPa+/-10 db(A))
You will need to buy
Standard 76 L (20 gallon),
762 mm (30") tall drain tub or utility
sink and sump pump (available
from local plumbing suppliers)
Detachable power supply cord -
see Electrical Requirements
Siphon break, Part Number
285834; additional drain hose,
Part Number 8318155; and
connector kit, Part Number 285835
1.2 m (4 ft) drain hose extension
kit, Part Number 285863
Optional pedestal
Approximate
Color
height with washer
1207 mm (47.5")
White
Part Number
WHP0400VW
Publicidad
