temperature. lt, tor example, an article consIsts ot o0%polyester and
40%cotton, according to the fa bric setting chart it should be ironed for
polyester and without steam.
6.
If you do not know what kind of fa bric the article is made of, iron a piece of
the material which is not visible when you wear to find out the appropriate
temperature for your articles.
7.
Pure woolen fa bries ( 100% wool) should be ironed with the iron setting to
steam ironing position. lt is advisable to set the temperature control dial to
"Max" position and use a dry pressing cloth.
8.
When steam ironing woolen fa bries, shiny patches may occur. You may
prevent this by turning the article inside out and ironing the reverse side.
9.
After using of steam ironing for cotton fabrics, do not iron articles required
by lower tempe rature (such as nylon etc.) immediately. lt is advisable to
adjust the tempe rature dial to the lower setting, waiting till the power
indicator light turn off, and then you can start ironing.
IMPORTANT HINTS:
Do not fill water tank with vinegar, starch, chemically descaled water or
descaling agents.
H o w to use your steam Station
Prepare the appliance for use
Check if the rating indicated in the rating
1.
plate corresponding to the main voltage
in your home.
2.
Press handle button to lay handle down.
3.
Remove the protective foil or sticker or
card tram the soleplate.(Fig. 1)
4.
Fully unwind and straighten the power
cord and the supply hose.
Fig.1