b.
Place the appl1ance on a stable, level and horizontal surtace such as 1ronmg
board
6.
Place the iron onto the iron rest plate horizontally at the base unit.
Fill water tank
1.
Press the water tank Iock upwards
and si ide the detachable water tank
outwards from the base.(Fig.2)
2.
Take the filter upwards out from the
water fill hale. (Vou can take the
filter out of the opening for filling
water into water tank, or fill water
into water tank directly with the
filter existing in the opening).(Fig.3)
3.
Fill the water tank up to or below
the "MAX" fill line with clean tap
water. (Fig.4)
4.
Replace filter back into water tank.
When move, please hold the water
tank by two hands. (Fig.5)
5.
Replace the water tank into the
base unit aga in. lt will be locked in
place with the base unit until a
"click" sound is provided. (Fig.6)
6.
Always pour out the remaining
water after use. (Fig. 7)
Note: When the water level reaches a
low level or empty, pump will provide
sound to indicate refilling. lt must stop
to use the appliance immediately and
refill water tank as the methods
mentioned above.
Fig.2
Fig.3
Fig.4
Fig.7
Fig.5
Fig.6