Descargar Imprimir esta página

Flymo XL550 Instrucciones Originales página 12

Ocultar thumbs Ver también para XL550:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 56
Blade
Part no.:
5119004-00
If any part is found to be defective due to faulty manufacture
within the guarantee period, Husqvarna UK Ltd., through its
Authorised Service Repairers will effect the repair or
replacement to the customer free of charge providing:
(a)The fault is reported directly to the Authorised Repairer.
(b)Proof of purchase is provided.
(c)The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d)The failure has not occurred through fair wear and tear.
(e)The machine has not been serviced or repaired, taken
apart or tampered with by any person not authorised
by Husqvarna UK Ltd..
(f)The machine has not been used for hire.
(g)The machine is owned by the original purchaser.
(h)The machine has not been used outside of the
country for which it was specified.
(i) The machine has not been used commercially.
* This guarantee is additional to, and in no way
diminishes the customers statutory rights.
Husqvarna UK Ltd. are manufactured under an
Environmental Management System (ISO 14001)
using, where practical, components manufactured in
the most environmentally responsible manner,
according to company procedures, and with the
potential for recycling at the end of the products' life.
Packaging is recyclable and plastic components
have been labelled (where practical) for
categorised recycling.
Awareness of the environment must be
considered when disposing of 'end-of-life'
product.
If necessary, contact your local authority for
disposal information.
Replacement Parts
Guarantee and Guarantee Policy
Failures due to the following are not covered, therefore it is
important that you read the instructions contained in this
Operator's Manual and understand how to operate and
maintain your machine:
Failures not covered by guarantee
* Replacing worn or damaged blades
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accordance
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing parts
* Caution! Husqvarna UK Ltd. does not accept liability
Environmental Information
DISPOSAL OF FUELS AND LUBRICATING OILS
ENGLISH - 5
with the instructions and recommendations contained in this
Operator's Manual.
and their life is dependent on regular maintenance and are,
therefore not normally subject to a valid warranty claim:
Blades.
under the warranty for defects caused in whole or part,
directly or indirectly by the fitting of replacement parts or
additional parts that are not either manufactured or
approved by Husqvarna UK Ltd., or by the machine
having been modified in any way.
Wear protective clothing when handling any fuels
and lubricants.
Avoid contact with skin.
Remove petrol and engine oil before transporting
the product.
Contact your local authority for information of
your nearest Recycling/Disposal Station.
Do NOT dispose of used fuels/oils with
household waste
Do NOT dispose of used fuels/oils to water.
Waste fuels/oils are harmful, but can be
recycled and should be disposed of through
the recognised facilities.
Do NOT incinerate

Publicidad

loading

Este manual también es adecuado para:

Xl500