2.
Quick Wash: Select this option to wash small loads of clothing that are not very dirty quickly.
3.
Delicates: Select this option for delicate fabrics such as dress shirts, nylons, etc.
•
Wash cycle operates at a lower temperature.
4.
Wool: Only use this option to wash wool clothing articles labeled "Machine Washable" .
•
Proper detergent and water temperature must be selected for wool textiles.
•
Lower spin speed and less agitation
5.
Baby Wear: For washing infant clothing
6.
Sanitary: Uses hot water to allow enzymes in detergent to work more efficiently for hard to clean or
heavily soiled items.
7.
Cold Wash: Only uses cold water.
8.
Tub Clean: Select this option to clean the wash tub. This program uses high temperatures to sterilize the tub
while removing built up detergent and residues. Add bleach for a better clean. This program should be
used at least once a month with regular use. DO NOT add any clothes or wash items for this program.
9.
Normal/Cotton: Select this option for regularly used cottons and fabrics.
•
Extended wash cycle with stronger intensity
•
Recommended fabrics: cotton, linens, bed sheets, t-shirts, towels, jeans, etc.
10.
Perm Press: Moderate strength wash cycle. Used to reduce wrinkles in clothes from washing.
11.
Heavy Duty: Select this option for washing heavy clothing.
12.
Bulky/Large: Select this option for bulky/large items.
•
Extended wash cycle
13.
Sports Wear: Select this option for sportswear.
•
Wash cycle cleans heavily soiled clothes.
14.
Spin Only: Select this option to spin a load separately from a regular wash cycle.
•
Soap water or rinse water must be drained before spinning.
15.
Drain Only: Used to drain any water in the unit.
16.
Rinse & Spin: Select this option to rinse and spin a load separately from a regular wash cycle.
•
This can be helpful in preventing fresh stains from setting in fabrics.
d.
Time Save: Press [Time Save] to decrease the washing time.
•
See Wash Cycle Parameters Table for programs that can use Time Save.
e.
Delay: Press [Delay] to set a delay time for the wash to begin.
•
The delay start light will flash to indicate the delay time. You can delay the start time of the cycle from
1 - 24 hours.
•
Set Wash program, Press Delay to set the number of hours to delay wash cycle, then push Start/Pause.
•
To cancel the delay time, press Delay button until time shows 0H.
f.
Temp.: Press [Temp.] to set your desired washing temperature.
•
Press button to set desired wash temp (Hot+, Hot, Warm, Eco, Cold)
g.
Spin: Press [Spin] to increase spin speed.
•
Washer drum spins at a speed up to 1300 RPM which reduces drying time and saves energy.
•
Press the button until desired speed is lit (No Spin, Low, Med, High, Highest).
•
Some fabrics (i.e. delicates) require a slower spin speed.
•
High spin speeds are not available on all cycles.
15