Rexel Momentum X308 Manual Del Usuario página 5

Indicator Panel Icon
Slider Switch
Reserve Setting
Shredding
in operation
INDICATOR
Cooling Down
INDICATOR
Operation
1. Remove the shredder from the packaging and place the
shredder head on top of the bin.
2. Connect the shredder to an appropriate mains supply.
3. To commence shredding move the slider to the left. The
'Shredder in operation' icon lights up blue. You are now able to
shred.
4. Insert paper to be shredded into the feed slot 'e'.
Note: Make sure the paper to be inserted is neatly stacked.
If the paper thickness is within the shredder's capacity, the
motor will start and your documents will be shredded. The
cutters will stop once the shredding process is complete.
5. If the paper thickness is greater than the shredder's capacity,
the shredder will stop. Slide the switch to the 'R' position and
reverse the jammed paper. If the paper is jammed to such
an extent that it will not come out using the reverse function,
slowly move the slider between the
Do not do this quickly as it can damage the shredder.
6. Remove some of the sheets from the paper stack and re-try.
The shredder will automatically start and allow the paper to be
shredded.
Warning: Do NOT under any circumstances use any
metal objects (scissors, letter openers etc.) in an attempt
to clear the paper entry.
Colour
White Move the slider to
play turn on
shredder
Move the slider to
manually remove
paper
Blue Constantly
illuminated –
unless in Power
Save mode.
Red Illuminates when
shredder is cooling
down
and .
Warning symbols
No CDs
Keep loose jewellery clear
No credit cards
Ties and loose clothing hazard
Keep long hair clear
Do not reach into opening
This equipment is not intended for use by children
Do not use spray cleaners or spray lubricants as these
may present a risk of flash fire
Manual feed slot capacity
No aerosols
Rare occasions of jamming
In the unlikely event of the shredder jamming, use the manual
reverse function as per step 5 of the 'Operation' section.
Reduce the number of sheets in the paper stack and re-try.
Reverse function
1. Should you wish to reverse the shredding direction whilst
shredding a document a reverse function
your convenience.
2. Push the slider to the right to reverse paper out.
3. The shredder will continue to run in reverse until the slider is
moved to the left.
Operation time
When the shredder is used continuously for 3 minutes or more the
shredder may overheat. If this occurs the overheat icon
illuminate red.
When the shredder is ready to be used again the red overheat icon
will go out. This will take approx. 60 minutes.
To resume shredding, feed paper into the feed slot.
has been fitted for
will
5 5 5