Messoa NDR891 Guia De Inicio Rapido página 11

2.2. Initial Configuration via a PC
Before connecting the camera to your network infrastructure, it's suggested that
you connect the camera to a computer first to perform initial configurations.
1. Configure the computer's IP address that must be on the same network
segment with the camera's default IP address (192.168.1.30 by default), such
as:
• IP Address: 192.168.1.100
• Subnet Mask: 255.255.255.0
2. Connect the RJ-45 cable of the camera to the computer.
The LAN port of the camera supports auto MDI/MDIX so there is no need to
use a cross-over cable.
3. To make sure the connection between the camera and the computer is
successful established, you can attempt to ping the camera from your
computer.
• First click the Start menu and select Programs. Then select Accessories.
• Choose Command Prompt. Click OK.
• Type ping x.x.x.x, where x.x.x.x is the IP address of the camera (default
is 192.168.1.30). If the message of "Reply from..." appears, it means the
connection is done.
4. On the PC, launch a web browser and enter the IP address of the camera in
the URL field:
http://192.168.1.30/
5. When prompted for login, respectively enter the default user name: admin
and password: 1234 to log in. Note that the user name and password are
case-sensitive.
6. Configure the settings to meet your requirements. For more information,
refer to the User Manual on the provided CD-ROM.
NDR891(H)/NDR891E(H) l Quick Start Guide 9