Publicidad
Rimovere la staffa dal proiettore
Utilizzare cavo in gomma
(H05RN-F 3x1mm
min3x1mm
2
1. Insert the cable into the fairlead and into the cable gland.
2. Loosen the screws of the wiring system and wire the cables (the yellow-
green cable must be inserted in the terminal )
3. Fasten the quick wiring system into the connectors on the spotlight. Be
sure to align the slot with the tab in the connector housing (fig. 1).
4. Place the fairlead on the fastening system and tighten on the spotlight.
14
Contrassegnare la parete con le
posizioni di fissaggio appropriate
Fessura del dispositivo
)
di cablaggio
2
Montare la staffa sulla parete
Fig.1
retro del proiettore
Aletta
Publicidad
