OHAUS Scout Pro SPx202 Manual De Instrucciones página 23

SCOUT PRO
Exiting Display Hold
3
ON/ZERO
Off
To return to display hold, repeat above procedure.
Totalize
Totalize is enabled only when Total is turned ON in the Mode submenu in the .S.E.T.U.P.
menu. Totalize allows storage of a series of weight measurements. Totalize mode has
been initiated when "t" and the current unit, i.e. (g) is displayed. When totalized
weight is shown, the "t" indicator will blink. NOTE: Units cannot be changed when
in Display-Hold mode.
(Place 1st weight on platform)
(Place 2nd weight on platform)
1
(Total weight shown)
PRINT
Unit
Total weight will remain on the display until weight is removed. The total weight remains
in memory. Total is limited to 999999.
(Example 10g)
(Remove weight)
1
PRINT
Unit
1
PRINT
Unit
1 (Total weight shown)
PRINT
Unit
(Place 3rd weight on platform)
(Remove weight)
EN-19
(Remove weight)