Urmet 1083 Manual De Configuración página 25

6. MANAGING THE SERVICE
To configure your device, firstly create an account
(or log in using an existing account), as explained in
the "CREATE A NEW ACCOUNT OR USE A SAVED
ACCOUNT" section.
From the Home Page, (with the green dot
and chain closed ) select the "Settings" key.
You will display:
Installation and maintenance
Service management
Settings Menu
Press the "Service Management" button.
The following page will appear:
* available only on some devices
Service management
DS1083-122A
displayed
User account
Configure app
Exit
My devices
— Press the "SIP ID" button to display the SIP ID
associated with your account.
— Press the "My devices" button to activate the
call forwarding service from the Multi-User Call
Forwarding Device 1083/83 on the smartphones.
6.1. SIP ID
Press the "SIP ID" button. The following screen will
appear:
WARNING! If on the smartphone there is a version
of the CallMe App lower than 3.0, with an account
associated with a / 58 or / 58A device, after updating
the application it is necessary to enter the name and
surname to create a new account with the new one.
application version. Once the new account has been
created, the App will automatically associate the old
account with the new one in order to continue receiving
calls from the / 58 and / 58A devices.
If a version higher than 2.0 has been directly installed
on your smartphone, the app will automatically set the
automatic SIP ID.
By pressing the "Set Automatic SIP ID" button you
can enable calls to be received from the /58 and /58A
devices configured with version 3.0 of the CallMe App.
By pressing the "Set Existing SIP ID" button, you can
enable calls to be received from the /58 and /58A
devices, configured with version 2.0 or lower of the
CallMe App.
Enter the "Username" and "Password" of the old
account, then press the "Set SIP ID" button.
The "Current SIP ID" field will show the user name used
on the /58 or /58A device from which you will receive
the calls.
SIP ID
25