Technics SB-G90M2 Instrucciones De Funcionamiento página 17

Connecting with an amplifier
≥ Before connection, turn off the amplifier and disconnect its power cord.
≥ For details, refer to the operating instructions of the amplifier.
∫ Single wiring connection
1 Connect the short wires (supplied)
Short wires (supplied)
Speaker (rear)
- (Black) + (Red)
2 Connect the amplifier and speaker with the speaker cable (commercially available)
e.g.,
Amplifier (rear)
Speaker (right) Speaker (left)
≥ The speaker cable is connected to the HF knob in the above diagram, but you will still achieve a normal stereo effect if you
connect to the LF knob.
17
(017)