Publicidad
Idiomas disponibles
Idiomas disponibles
EN
FR
DE
ES
IT
NL
SAFETY INSTRUCTIONS
Please read and observe these instructions before using
the device.
Before using the device, check that the mains cable
and mains plug are not damaged.
The device must not be damp, neither should it be
used in a damp environment.
Do not use the device if it has suffered any heavy
shock or jolting, or is damaged in any other way.
Due to the heat generated during charging, the battery
charger should not be operated on a combustible
surface or in an inflammable environment.
Do not cover the ventilation slits.
Never disassemble the device yourself.
Pull the plug of the battery charger out of the socket
when it is not in use or when cleaning it.
Only use extension cable that is approved and
technically in perfect condition.
During
operation,
provide
Malfunction during charging can be caused by storing
and operating in places where the temperature
charging in closed cupboards and near heat sources
(radiators, bright sunshine) causes heat to accumulate
and can damage the device.
If the battery is not going to be used for a longer
period, pull the battery off the battery charger and pull
out the mains plug.
Protect the battery contact to avoid short circuit caused
by metallic object that can cause fire or explosion.
Only charge original recommended batteries.
If the power cord is damaged, it must be replaced by
an authorised service center in order to avoid a hazard.
WARNING
Do not recharge primary cells (non-rechargeable)
WARNING
Mains voltage must correspond with the voltage
specifications on the device.
PT
DA
SV
FI
NO
RU
English
sufficient
ventilation.
PL
CS
HU
RO
LV
LT
ADDITIONAL BATTERY SAFETY WARNINGS
damage due to a short circuit, never immerse your tool,
water, certain industrial chemicals, and bleach or bleach-
containing products, etc., can cause a short circuit.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
DESCRIPTION
See page 1.
1. Battery port
2. Green LED
3. Red LED
4. "Key Hole" hanger
OPERATION
APPLICATIONS
You may use this product for the following purposes:
battery packs.
BATTERY PROTECTION FEATURES
designed with features that protect the lithium-ion cells
and maximize battery life.
If the tool stops during use, release the trigger to reset and
resume operation. If the tool still does not work, the battery
needs to be recharged.
CHARGING THE BATTERY PACK
USE ONLY RYOBI ONE+ 18 V AND 14.4 V BATTERY
PACKS WITH THIS CHARGER:
Battery packs for this tool are shipped in a low charge
condition to prevent possible problems. Therefore, you
should charge them until the green LED on the front of the
charger stays on.
2
ET
HR
SL
SK
BG
UK
WARNING
TR
EL
-
Publicidad
