Progress Lighting AirPro P250073 Manual De Instalación página 8

Attaching the Decorative
Ring
1. Attach the decorative ring through the
bottom of the flywheel by aligning the
holes on the decorative ring with the
holes on the tab and install the screws.
(Figure 7)
2. Put the fan motor assembly inside the
flywheel, engage the fan motor assembly
with tabs onto the flywheel by turning
clockwise till the screw holes on the fan
motor assembly align with the holes on
the tab of flywheel.(Figure 8)
3. After aligning the holes on the flywheel
with the holes on the tab, install the
screws. (Figure 9)
4. Put the upper housing on to the fan motor
assembly, then install the screws. (Figure
10)
5. Make sure all the screws are firmly
tightened.
5.
Screws
Decorative ring
Flywheel
assembly
Screws
Flywheel
Figure 7
Screws
Motor
Figure 8
Figure 9
Upper housing
Figure 10