Mitsubishi Electric PAR-32MAA Manual De Instrucciones página 14

Basic operations
Operation mode, temperature, and fan speed settings
Button operation
Operation mode
Cool
Mode
F1
What the blinking mode icon means
The mode icon will blink when other indoor units in the same refrigerant system (connected to the same
outdoor unit) are already operated in a different mode. In this case, the rest of the unit in the same
group can only be operated in the same mode.
<AUTO (dual set point) mode>
When the operation mode is set to the Auto (dual set point) mode, two preset
temperatures (one each for cooling and heating) can be set. Depending on the room
temperature, indoor unit will automatically operate in either the Cool or Heat mode
and keep the room temperature within the preset range.
The graph below shows the operation pattern of indoor unit operated in the Auto
(dual set point) mode.
Preset temp.
(COOL)
Preset temp.
(HEAT)
14
Fri
Room
Set temp. Auto
Temp. Fan
F2 F3 F4
Operation pattern during Auto (dual set point) mode
HEAT
Press the F1 button to go through the operation
modes in the order of "Cool, Dry, Fan, Auto, and
Heat." Select the desired operation mode.
Cool
Auto
•Operation modes that are not available to the connected
indoor unit models will not appear on the display.
The room temperature
changes corresponding
to the change in the
outside temperature.
COOL HEAT
ON
Dry Fan
Heat
Room temperature
COOL