Operations; Operation Settings By Group - Mitsubishi Electric PAC-SC30GRA Libro De Instrucciones

4. Operations

4-1. Operation settings by group

(1) With the cover closed:
CENTRALLY CONTROLLED
CHECK
ADDRESS ON OFF
˚C
COLLECTIVE
GROUP
(1) With the cover closed:
1 The start and stop functions of the air conditioners for each group can be controlled using the
ON/OFF switch by group.
(2) With the cover open:
1 Use the GROUP select switch to call the group that you want to set. (GROUP SELECTION
DISPLAY: The position of the "s" will change. Groups of air conditioners that have not been
registered will be skipped.)
G 1
G 5
2 Controlling the items that you want to adjust
• If the selected group is not in operation, press the ON/OFF switch to start operation.
• Press the switch that you want to adjust (OPERATION MODE, TEMPERATURE SETTING,
FAN SPEED, AIR DIRECTION SETTING, HORIZONTAL BLOW, VENTILATION SETTING and
EXTERNAL TIMER SETTINGS).
(For detailed explanations on how to adjust each feature, refer to 4-3.)
• If the registered group contains air conditioners that are not equipped with the FAN SPEED,
AIR DIRECTION SETTING, HORIZONTAL BLOW, VENTILATION SETTING and EXTERNAL
TIMER SETTINGS, the message "NOT AVAILABLE" will blink to indicate that the setting is not
supported.
8
ON/OFF
˚C
GROUP
FILTER
CHECK MODE
TEST RUN
NOT AVAILABLE
G 2 G 3
G 6 G 7
(2) With the cover open:
CENTRALLY CONTROLLED
CHECK
COLLECTIVE
GROUP
1
GROUP
REMOTE CONTROLLER
PAC-SC30GRA
G 4
COLLECTIVE OPERATION
SETTING SCREEN
G 8
"Group" is abbreviated as "G".
ON/OFF
˚C
ADDRESS ON OFF
GROUP
FILTER
˚C
CHECK MODE
TEST RUN
NOT AVAILABLE
TEMP. ON/OFF
FILTER
CHECK
GROUP
TEST RUN
2
1