Publicidad
Idiomas disponibles
Idiomas disponibles
When all devices have the same address, all the units will "listen" to the
control signal on one particular channel. In other words: changing the
settings of one channel will affect all devices simultaneously. If you set
individual addresses, each device will "listen" to a separate channel number.
Changing the settings of one channel will only affect the device in question.
5.5
Refer to page 2 of this manual.
5.6
Refer to page 3 of this manual.
6.
Cleaning and Maintenance
Before starting any cleaning or maintenance activities:
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
Cleaning
Use normal glass cleaner and a soft cloth to wipe off the outside casing.
Always be sure to dry all parts completely before plugging the device back in.
Cleaning frequency depends on the environment in which the unit operates (i.e.
smoke, fog residue, dust, dew).
Do not immerse the device in any liquid.
Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g.
ceiling, suspension, trussing) should not be deformed, modified or tampered
with; e.g. do not drill extra holes in mounting supports, do not change the
location of the connections...
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified
technician maintain the device.
There are no user-serviceable parts, apart from the fuse and the lamp.
Refer to an authorized dealer for service and/or spare parts.
V. 02 – 18/12/2017
DMX Mode
Button Specifications
HQLP10001
8
©Velleman nv
Publicidad
