Publicidad
Enlaces rápidos
Models/Modelos/Modèles
63025LFp & 63925LFp
Series/Series/Seria
ARTESSO
®
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
pSpecify Finish / Especifíque el Acabado / Précisez le Fini
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your
Brizo
faucet you will need:
®
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet
Brizo
facilement, vous devez:
®
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
www.brizo.com
PULL-DOWN AND PREP KITCHEN FAUCETS
77940
LLAVE DE AGUA-GRIFO EXTRAÍBLE
PARA COCINAS Y FREGADEROS PARA
PREPARATIVOS
ROBINETS À AFFLEUREMENT ET À BEC
RÉTRACTABLE POUR ÉVIER D'ÎLOT ET
ÉVIER DE CUISINE
63025LFp
77940
1
63925LFp
T E FLO N
RP71451p
Optional Escutcheon
La opción de Chapetón
Plaque de finition en option
10/22/2019
Rev. H
Publicidad
Manuales relacionados para Brizo RP71451 Serie
Resumen de contenidos para Brizo RP71451 Serie
- Página 1 63025LFp 63925LFp You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: T E FLO N For easy installation of your Brizo faucet you will need: ® • To READ ALL the instructions completely before beginning. • To READ ALL warnings, care, and maintenance information.
- Página 2 1 1/4" Min. From Center Line To Sink Bowl. 1 1/4" Mínimo. De la línea de centro para hundir el tazón de fuente. 1 1/4" ; Minimal. De la ligne centrale pour descendre la cuvette. Mount Faucet to Deck Install the mounting bracket (1) and nut (2) onto the SHUT OFF WATER SUPPLIES.
- Página 3 Optional / Opcional / Facultatif Optional Escutcheon Installation From underneath, install the nuts (1) and washers Install bracket (1) and nut (2) onto mounting (2) onto the studs (3). Ensure the escutcheon shank (3). Tighten nut (2) securely using For optional installations using the 10" escutcheon (1), is straight then tighten nuts (1), but do not over wrench (4).
- Página 4 Custom Fit Connections Standard Connections Slide nut (1) over plastic sleeve (ferrule) (3). Start nut by hand NOTICE NOTICE onto supply valve connection (2) to prevent cross-threading. Turn nut until it feels snug. Then tighten nut at least 2 more To avoid risk of property damage, Follow If you determine the PEX supply tubing for this faucet is too turns with a wrench.
- Página 5 Correct method Incorrect Installation Instalación Incorrecta Método Correcto Installation Incorrecte Bonne méthode Do not install sleeve NOTICE Ensure cut is straight. upside down. Failure to use plastic sleeve (ferrule) in the correct orientation will result in disconnection and possible water damage. No instale la manga Asegúrese que el corte 1.
- Página 6 Flush Supply Lines Because your sprayer has been factory assembled to the hose, we do not Hose Installation recommend removing to flush the lines. Instead, if possible, we recommend placing a bucket below the outlet fitting and using one of two options. Remove hose guide (1) and slide hose weight (2) over end of hose (3).
- Página 7 Side View Vista lateral Vue latérale Note: Clip fits behind shoulders on outlet and hose fittings. Nota: Ajustes del clip detrás de hombros en las guarniciones del enchufe y de manguera. Note : Ajustements d’agrafe derrière des épaules sur des embouts de sortie et de durites.
- Página 8 Optional Opcional Facultatif Soap Dispenser Installation (Accessory Order Only - RP75675 Specify Finish) Recommended spacing between holes for faucet and soap Notice dispenser is 4" (101.6 mm) minimum. Separate head (1) from body assembly (2). Make sure gasket (3) is properly seated in the base of the body assembly. Insert Property damage and water leak possible.
- Página 9 Maintenance Cleaning and Care counterclockwise. Bonnet may be stiff due to O-ring, If faucet exhibits very low flow – Care should be given to the cleaning of this product. but should rotate by hand. Remove bonnet nut (8) Unscrew hose from spray head and clean Although its finish is extremely durable, it can be by rotating counterclockwise with a wrench.
- Página 10 77940 Rev. H...
- Página 11 77940 Rev. H...
- Página 12 BRIZO KITCHEN & BATH COMPANY SHALL NOT BE LIABLE FOR ANY DAMAGE TO THE FAUCET RE- by this warranty. Brizo Kitchen & Bath Company shall not be liable for any damage to the product resulting from SULTING FROM REASONABLE WEAR AND TEAR, OUTDOOR USE, MISUSE (INCLUDING USE OF THE...