Philips SRU4050 Manual Del Propietário página 4

Button Functions, cont.
SAT Functions
CHANNEL+ and CHANNEL- buttons perform the
"Page+" and "Page-" function for on-screen Guide
Menus used by some Satellite systems.
INFO button brings up Satellite Display screen for
current Channel and system information.
The Satellite GUIDE is accessed under the CC button
when in SHIFT mode.
DVD Functions
FORWARD and REVERSE buttons control the speed of
Fast Forward and Reverse Playback respectively.
CHANNEL+ and CHANNEL- buttons respectively
locate the succeeding or preceding Chapters or Tracks
on a disc.
SUBTITLE (CC) button turns the subtitles on or off.
REPEAT (LAST) button performs DVD players "A-B
Repeat" (or RPT A.B) function for repeat play of current
Chapter or Track.
INFO button brings up DVD Display or Control Menu
for Chapter/Track/Title number, Time remaining/elapsed
indication, system information, etc.
PLAY button is used to start Disc playback and for
Menu selection on some DVD players.
STOP button stops Disc playback.
PAUSE button pauses Disc playback - press PLAY to
resume.
INPUT button activates the DVD Player's SETUP Menu.
INPUT
When in TV mode the INPUT button performs the
INPUT source switch function.
When in a mode that has been programmed for VCR the
INPUT button performs the TV/VCR antenna switch
function.
When in a mode that has been programmed for Cable the
INPUT button performs the A.B switch function.
When in a mode that has been programmed for SAT the
INPUT button performs the TV/SAT switch function.
When in a mode that has been programmed for DVD the
INPUT button performs the DVD Setup function.
OK means same as SELECT - some manufacturers use
OK label and others use SELECT label on their remotes.
CC will activate the Closed Caption feature if your
device has that feature.
6
SRU4050A-OM(4D)_H14042A.pmd
All manuals and user guides at all-guides.com
6-7
Button Functions, cont.
SHIFT Button
The SHIFT button is a "toggle" button. I.E. press and
release it to get into shifted operation, press and release
again to get back out. The Red Indicator is on when you
are in "shifted" mode.
The shifted functions are those labeled in Green i.e.
MENU, EXIT, OK, GUIDE, and the navigation keys.
When not in Shift these buttons operate respectively as
INFO, LAST, MUTE (M), CC, CHAPTER/CHAN UP/
DOWN and VOLUME UP/DOWN. The non-shifted
functions are those labeled in Black or Blue.
To access the shifted "green" functions, press and
release SHIFT. The Red Indicator will stay on while in
Shift mode and blinks off briefly for any subsequent
button press. Press and release desired button labeled in
green for that function. To exit Shifted operation, press
and release the SHIFT button. Note the remote will
automatically time-out from Shifted mode if no button is
pressed for approximately 15 seconds.
To access the following functions in SAT or DVD
Modes, press SHIFT first.
MENU button brings up the Menu screen - use with the
UP, DOWN, LEFT and RIGHT navigation buttons.
OK button is used for on-screen Menu selection.
EXIT button is used to Exit or Clear on-screen Menu
displays.
Example:
To access Menu and use the navigation functions.
1. Press and release SHIFT (red indicator turns on).
2. Press and release the MENU (INFO) button.
3. Press and release the UP, DOWN, LEFT and RIGHT
buttons as desired.
4. Press and release the EXIT (LAST) button to clear
the on-screen Menu display.
5. Press and release SHIFT for normal remote operation
(red indicator turns off).
7
10/9/2006, 2:49 PM