Installation
1
Installing the faucet assembly
CAUTION: Always shut off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle
to relieve water pressure and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old faucet. Clean the mounting surface.
1a
NOTE: This step is for no escutcheon installation (optional).
□
Insert the faucet assembly (A) through the hole
in the sink.
A
1b
NOTE:
This step is for escutcheon installation (optional).
□
Place the escutcheon (D) and the gasket (E) on
the bottom of the new faucet assembly (A).
□
Insert the faucet assembly (A) through the hole
in the escutcheon (D).
NOTE: A silicone is required under the gasket (E).
4
4
A
D
E