Klip Xtreme VoxCom Manual De Instrucciones página 3

LED indicators
Mode
Power on
Power off
Pairing mode
Delete paired device
Reconnect mode
Unconnected standby mode
Connected standby mode
Music playback
Talking
Low battery
Charging
Full charge
III. Charging the headset
• Plug one end of the supplied Type C cable into the headset's Type C port and
the other end to the USB port of your computer to charge the battery.
• The battery takes up to an hour and a half to fully charge.
• Make sure the headset is fully charged before using it for the first time.
• While the headset is being charged the LED indicator glows red.
• Once the headset is fully charged, the LED indicator turns blue.
• When the battery is low, the LED indicator blinks in red. If the battery gets to
20%, a tone will be heard to let the user know that the battery level is low.
LED indicator
LED blinks blue 3 times
LED is on in red for 1 second
LED blinks red and blue alternately
LED blinks blue and red once at the same time
LED blinks blue twice every 5 seconds
LED blinks blue twice every 5 seconds
LED blinks blue once every 10 seconds
LED blinks blue twice every 10 seconds
LED blinks blue twice every 10 seconds
LED blinks in red
LED is solid red
LED is solid blue
IV. Headset operation
1. Press and hold the multifunction button for 3 seconds to power on the headset,
a tone will be heard.
2. Press and hold the multifunction button for 5 seconds to power off the headset,
a tone will be heard.
3. To answer a call, press the multifunction button once. Press it again to hang up.
Press and hold it to reject a call.
4. To play music press the multifunction button.
5. Press the volume – button to decrease the volume level.
6. Press and hold the volume – button to go to the previous song.
7. Press the volume + button to increase the volume level.
8. Press and hold the volume + button to go to the next song.
9. Press the mute button during a call to mute the microphone, a tone will be
heard. Press it again to unmute and another tone will be heard.
Note: The mute function of the microphone takes place directly on the unified
communications platform you are using. You may also press the mute button in
the conference call software to manage this function.
10. Press the multifunction button for 3 seconds to activate Google Assistant or Siri.
Note: The voice assistant function is only supported on smartphones
Note: This headphone includes a 3.5mm to Type C audio cable. When listening
to music or audio from a device connected to the 3.5mm cable, the headphone's
buttons won't work. You will need to press the buttons in the connected device
to play, pause, or stop audio playback.
2
3.